Water Heater Safety Valve and Drainage Tube

17,95€

Electric Water Heater Safety Valve. Pressure Relief Valve (0.9 mPa), 1/2-Inch Male–Female + 1-Metre Drain Tube

  • INCLUDES: 1 electric water heater safety valve with a locking lever + 1 clear tube, 1 metre long.
  • USES: Safety, pressure relief, drain and non-return valve for electric water heaters. Suitable for both household equipment and industrial applications.
  • FUNCTIONS: Prevents hot water from flowing back into the cold-water pipe, limits pressure and protects against overpressure that could rupture the water heater. An essential component for equipment safety. The hose allows water to be discharged to a remote drain.
  • SPECIFICATIONS: Opening pressure: 0.9 mPa (9 bar) ± 0.5 bar. Maximum operating temperature: 180°C. Connection: 1/2-inch female–male + 1-metre plastic hose for pressure relief.
  • QUALITY: Valve body made from reinforced nickel-plated brass. Stainless steel springs. Seals, shut-off lever and PVC drain tube.
Categories: , SKU: 23001

Description

Water heater safety valves:

This electric water heater safety valve protects the appliance against excessive pressure increases as the water heats. It includes an outlet for a drain tube to safely discharge the released water. It operates at 0.8 MPa and is suitable as a replacement for compatible electric water heaters. Before buying, check the connection size, the manufacturer’s specified pressure and compatibility with your water heater. Install it in the direction of flow marked on the valve.

When installed on the cold-water inlet, it performs two functions:

  • It prevents the warm water from returning to the cold water pipe.
  • Limits pressure by releasing water to protect the boiler against overpressure that could rupture it.
  • Above all, its most important role is safety. If the water heater’s pressure rises as it heats, the safety valve releases the necessary water, preventing serious damage and dangerous excess pressure. Any discharged water normally flows through a small plastic tube to the home’s drainage system, which is why our set includes a 1-metre clear hose.

Easy to change. Essential components for electric water heater safety.
Steps to change the safety valve:

  1. Disconnect the water heater: Disconnect it from the electricity supply and close its water inlet and outlet valves.
  2. Open a nearby tap in the hot-water position until the water stops flowing, then close it immediately.
  3. Next, remove the hose connecting the pipe to the damaged valve.
  4. Replace the valve: Once the water stops flowing, fit the new valve to the inlet connection, applying Teflon to the male thread where it connects.
  5. Once the valve is connected, open only the water inlet valve and check for leaks.
  6. If everything is correct, open the outlet valve. It is important to open the nearest tap in the hot-water position to release all the air from the hot-water pipe.

Technical characteristics: Material: Brass. Opening pressure: 0.9 mPa (9 bar) ± 0.5 bar. Maximum operating temperature: 180°C. Connection: 1/2-inch female–male. Hose: 1 metre. Valve weight: 92 g. Size: Approx. 45 × 60 mm / 1.8 × 2.4 inches.